Check the runout of lathe spindle first. Adjust the runout value of nose within 0.004mm; of cylinder or taper within 0.004mm shown asbelow. Then put the 5C chuck onto the lathe spindle nose, with the setting hole at the right position to fix each other While measuring, we used the screw lock device shown in picture-1. We did not have cam lock device shown in picture-2.
They work theoretically the same, by different methods. After putting the 5C fixture into the measuring equipment, enable the screw lock or the cam lock to work with the chuck on the measuring equipment. Please be noticed to tighten the cam screws in multiple strokes crossly.Approach the surface of the taper hole with a micron indicator; then rotate the measuring equipment slightly. Reading and noting the micrometers value.
Tighten the one or two cam screws to correct the 5C fixture, until the runout value within 0.006mm. Applying the standard 5C measuring bar, use two lock gears to tighten it slightly. And assure the run-out of the 5C fixture orifice, 0.015mm. Discover more products here: Quality Machine Shop. 4-30 Fulton Way Richmond Hill, ON L4B 1E6 Canada.
We will choose a carrier unless you indicate a preferred method. Listing and template services provided by inkFrog.The item "5C 5 Collet Chuck Plain Back for Lathe Machine, #0269-0010" is in sale since Wednesday, February 25, 2015. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Chucks\Collet Chucks". The seller is "quality_machine_shop" and is located in TORONTO, ONTARIO. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia, Japan.