5C 5'' Collet Chuck, Plain Back, for Lathe Machine, 0269-0010
6.3 x 5.91 x 6.3 inches. Plain Back, Recessed 3.740'' x 0.184'' Deep. Plain Back, have to shoose proper back plate to connet with your machine.
Should be used with back plate (adapter) to connect with your specific lathe spindle. Can use any size 5C Collet: Round collet :1/16 1-1/8"; Hex collet:1/8" 7/8"; Square Collet:1/8" 3/4. Scroll and pinion design just like 3-jaw chuck, operated with chuck key. Scroll & pinion precision machined and hardened.Outside Diameter 5:Compatible with a wide range of lathe machines, requires back plate for connection. Versatile Collet Compatibility: Accepts 5C round (1/16"-1-1/8"), hex (1/8"-7/8"), square (1/8"-3/4") collets.
Precision Design: Scroll and pinion mechanism, mirroring 3-jaw chuck operation, with hardened precision for durability. High Performance: Maximum RPM of 6000, with outstanding accuracy of 0.0006 TIR, enhancing machining precision.
Durable and Reliable: Weighing 10.44 lbs, designed for both lathe and grinding machine applications, ensuring long-term usability. Can be sued on the lathe and grinding machines. Plain Back, have to choose proper backplate to connect with your machine. Should be used with backplate (adapter) to connect with your specific lathe spindle.
Scroll and pinion design just like 3-jaw chuck operated with chuck key. Plain Back, have to choose the proper backplate to connect with your machine. You need to confirm the taper of your lathe using this 5C collet chuck is. Before you place an order. Otherwise, the run-out will not be accurate at all. Usually, when a lathe has been running for a few years, its taper becomes not as accurate as a new lathe, which causes inaccurate run-out when operating the 5C collet chuck. The method of measuring the 0269-5C Collet Chucks: Step 1. Check the runout of lathe spindle first. Adjust the runout value of nose within 0.004mm; of cylinder or taper within 0.004mm shown as above. The method of measuring the 0269-5C Collet Chucks: Step 2. Then put the 5C chuck onto the lathe spindle nose, with the setting hole at the right position to fix each other While measuring, we used the screw lock device shown in picture-1. We did not have cam lock device shown in picture-2.They work theoretically the same, by different methods. The method of measuring the 0269-5C Collet Chucks: Step 3 and Step 4.
After putting the 5C fixture into the measuring equipment, enable the screw lock or the cam lock to work with the chuck on the measuring equipment. Please be noticed to tighten the cam screws in multiple strokes crossly. Approach the surface of the taper hole with a micron indicator; then rotate the measuring equipment slightly. Reading and noting the micrometer's value.Tighten the one or two cam screws to correct the 5C fixture, until the runout value within 0.006mm. The method of measuring the 0269-5C Collet Chucks: Step 5. Applying the standard 5C measuring bar, use two lock gears to tighten it slightly. And assure the run-out of the 5C fixture orifice, 0.015mm. We offer the best prices around on high quality products.
Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied.If there's a problem, message us! We're happy to help.